Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

In the following steps, you will use a metal spudger to lift the front panel out from the rear case of your TouchPad.

The front panel is held in by seven clips (boxed in red) that are lightly anchored to the rear case. When you remove the front panel assembly, you are bound to break either the clips or their supports attached to the rear case. We will update this guide as we find replacement parts or a better method to remove the panel.

As you remove the front panel assembly, also be careful not to damage the ambient light sensor (boxed in yellow) or the two antennas (boxed in orange).

Ваш вклад лицензируется под свободной лицензией Creative Commons.