Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

In the following steps you will be cutting through the adhesive around the edge of the rear glass panel.

The adhesive on the rear case is laid out as seen in the first image.

The prying pattern as seen from the outside of the phone is as follows:

Thick portions of adhesive

Thin areas of adhesive

Avoid prying here, to protect the fingerprint sensor.

Ваш вклад лицензируется под свободной лицензией Creative Commons.