Перейти к основному содержанию
Помощь
Редактирование шага 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the home button bracket.

During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it.

Scrape off as much of the old adhesive residue as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.

Secure the bracket with hot-melt glue, superglue, or high-strength double-sided tape. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

Ваш вклад лицензируется под свободной лицензией Creative Commons.