Skip to main content
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 45 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.

Be sure to push parallel to the board, first on one side, then the other, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.