iPhone 16 5G mmWave Antenna Installation
-
-
Use tweezers or your fingers to remove the old adhesive from the top of the earpiece speaker.
-
-
-
Apply thin double-sided tape, such as Tesa tape, to the back of the 5G mmWave antenna.
-
Peel off the backing to expose the adhesive.
-
-
-
Use tweezers or your fingers to hold the 5G mmWave antenna above its cutout in the earpiece speaker.
-
Use the flat end of a spudger or your finger to connect the antenna press connector.
-
Press the 5G mmWave antenna into its cutout to ensure it adheres fully to the earpiece speaker.
-