Перейти к основному содержанию

Введение

This guide shows how to remove the SIM card tray to replace the network SIM card in the iPhone SE 2020.

Инструменты

Запчасти

Детали не указаны.

  1. Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray. Press to eject the tray.
    • Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.

    • Press to eject the tray.

    • This may require a significant amount of force.

  2. Remove the SIM card tray from the iPhone. The SIM card will fall out of the tray easily.
    • Remove the SIM card tray from the iPhone.

    • The SIM card will fall out of the tray easily.

    • When reinserting the SIM card, ensure that it is in the proper orientation relative to the tray.

    • A thin rubber gasket around the SIM card tray provides water and dust protection. If this gasket is damaged or missing, replace the gasket or the entire SIM card tray to protect your iPhone's internal components.

Заключение

To reassemble your device, follow these instructions in reverse order.

4 участников успешно повторили данное руководство.

Adam O'Camb

Участник с: 11.04.2015

157 094 Репутация

Автор 418 руководств

Команда

iFixit Участник iFixit

Community

146 членов

Автор 17 253 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 18

За последние 7 дней: 74

За последние 30 дней: 185

За всё время: 3,673