Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 17 руководства, которые включают этот шаг.
Перевод шага 11
-
Use tweezers to peel off and remove all the old gasket from the frame and speaker.
-
Use a microfiber cloth and isopropyl alcohol to clean all the gasket's adhesive residue from the frame and speaker.
-
Before installing the speaker gasket, find its proper orientation on the bottom of the speaker—the large cutout on the gasket should go around the speaker grille mesh.
-
Remove the larger, clear liner from the gasket and use tweezers to carefully put the gasket into place on the bottom of the speaker.
-
Use your fingers or a spudger to firmly press the gasket into place to secure it with the adhesive.
-
Remove the remaining liner and put the speaker into place, making sure the speaker connector doesn't get stuck underneath.
| + | [title] Replace the speaker gasket |
|---|---|
| + | [* icon_reminder] The speaker's gasket is not reusable. During reassembly, follow this step to replace the gasket. |
| + | [* black] Use tweezers to peel off and remove all the old gasket from the frame and speaker. |
| + | [* black] Use a microfiber cloth and isopropyl alcohol to clean all the gasket's adhesive residue from the frame and speaker. |
| + | [* black] ''Before'' installing the speaker gasket, find its proper orientation on the bottom of the speaker—the [link|https://guide-images.cdn.ifixit.com/igi/EHhKqCNX1TBgIkMl.full|large cutout on the gasket|new_window=true] should go around the [link|https://guide-images.cdn.ifixit.com/igi/AC1hsSFhNHWCShAN.full|speaker grille mesh|new_window=true]. |
| + | [* black] Remove the larger, clear liner from the gasket and use tweezers to carefully put the gasket into place on the bottom of the speaker. |
| + | [* icon_caution] To avoid touching the exposed adhesive, only grip the gasket by the [link|https://guide-images.cdn.ifixit.com/igi/Qd3CQEk51r4WRpJO.full|outer edges of the liner|new_window=true]. |
| + | [* black] Use your fingers or a spudger to firmly press the gasket into place to secure it with the adhesive. |
| + | [* black] Remove the remaining liner and put the speaker into place, making sure the [link|https://guide-images.cdn.ifixit.com/igi/THSXRMOgw6BNQtfd.full|speaker connector|new_window=true] doesn't get stuck underneath. |
Ваш вклад лицензируется под свободной лицензией Creative Commons .