Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Remplacement des caméras arrière de l'iPhone 8 Plus

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Английский
Французский
Шаг 3
iPhone 8 Plus Rear-Facing Cameras Replacement: шаг 0, изображение 1 из 2 iPhone 8 Plus Rear-Facing Cameras Replacement: шаг 0, изображение 2 из 2
  • Remove the two screws securing the rear camera module cover plate:

  • One 1.8 mm Phillips screw

  • One 2.7 mm (nonferrous) standoff screw

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage nearby components.

Dévissez les deux vis fixant le cache du module de la caméra arrière :

Une vis cruciforme de 1,8 mm

Une vis d'entretoise de 2,7 mm (non ferreuse)

Le mieux est d'utiliser un embout pour vis d'entretoise spécial iPhone et un manche de tournevis.

Un petit tournevis plat inséré dans une fente fera le travail, mais faites preuve de prudence pour éviter de glisser et d'endommager les composants environnants.

[* black] Remove the two screws securing the rear camera module cover plate:
[* red] One 1.8 mm Phillips screw
[* orange] One 2.7 mm (nonferrous) standoff screw
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage nearby components.

Ваш вклад лицензируется под свободной лицензией Creative Commons .