/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Регистрация
Войти

Sostituzione porta MagSafe nel MacBook Pro 16" 2021

Следующий шаг

Перевод шага 1

Назад к руководству
Английский
Итальянский
Шаг 1
MacBook Pro 16" 2021 MagSafe Port Replacement, Unfasten the MagSafe port: шаг 0, изображение 1 из 2 MacBook Pro 16" 2021 MagSafe Port Replacement, Unfasten the MagSafe port: шаг 0, изображение 2 из 2
Unfasten the MagSafe port

  • Use a 2IP Torx Plus driver to loosen (don't remove) the two MagSafe Port set screws a few turns above the frame.

  • In a pinch, you can use a standard T2 Torx driver to loosen these screws. Make sure to apply constant, downward force to prevent stripping.

  • Use a T3 Torx driver to loosen the two 3.7 mm screws enough to unfasten the MagSafe port.

  • These screws are not magnetic—be careful not to lose them.

Allenta la porta MagSafe

Utilizza un cacciavite Torx T5 per rimuovere le due viti da 2,6 mm che fissano la porta MagSafe.

Utilizza un cacciavite Torx T3 per allentare le due viti da 3,7 mm quanto basta per sbloccare la porta MagSafe.

[title] Unfasten the MagSafe port
-[* red] Use a T5 Torx driver to remove the two 2.6 mm screws securing the MagSafe port.
+[* red] Use a 2IP Torx Plus driver to ***loosen*** (don't remove) the two MagSafe Port set screws a few turns above the frame.
+ [* icon_note] In a pinch, you can use a standard T2 Torx driver to loosen these screws. Make sure to apply constant, downward force to prevent stripping.
[* orange] Use a T3 Torx driver to loosen the two 3.7 mm screws enough to unfasten the MagSafe port.
+ [* icon_note] These screws are not magnetic—be careful not to lose them.

Ваш вклад лицензируется под свободной лицензией Creative Commons .