Перейти к основному содержанию

Procédure d'ouverture

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 17 руководства, которые включают этот шаг.

Английский
Французский
Шаг 24
Opening Procedure: шаг 0, изображение 1 из 2 Opening Procedure: шаг 0, изображение 2 из 2
  • Be very careful with this step. Take your time, ensure the adhesive is hot and soft, and make sure you separated all of the adhesive with an opening pick. Don't be afraid to stop and reheat.

  • Twist the two opening picks on the left corners of the iPad to lift the digitizer slightly, separating the the last of the adhesive in the process.

  • If there's a significant amount of resistance, reheat the edges and work along them with an opening pick.

Faites très attention lors de cette étape. Prenez votre temps, assurez-vous que l'adhésif est chaud et mou, et vérifiez que vous avez séparé tout l'adhésif à l'aide d'un médiator. N'ayez pas peur d'arrêter et de réchauffer.

Tordez les deux médiators situés dans les coins gauches de l'iPad pour soulever légèrement la vitre tactile, faisant ainsi céder la dernière partie de l'adhésif.

Si la résistance est importante, réchauffez les bords et parcourez-les avec un médiator.

Ваш вклад лицензируется под свободной лицензией Creative Commons .