iPhone 14 Pro Taptic Engine/탭틱 엔진 교체

Английский

Корейский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone 14 Pro Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

iPhone 14 Pro 스크린 사전 작업

iPhone 14 Pro 라우드스피커 교체

Информационный справочник

= Готово = Не завершен

Какую деталь вы заменяете?

Название

Введение

The Taptic Engine produces your iPhone's vibration and haptic feedback functions. Use this guide to remove and replace the Taptic Engine in an iPhone 14 Pro.

This guide was created using the ***A2890*** (international) model. If you're fixing a different iPhone 14 Pro model, there may be some visual discrepancies, but the procedure should be the same.

***For your safety, discharge the battery below 25% before disassembling your device.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].

You’ll need replacement adhesive to safely secure the screen when reassembling your iPhone. Retaining water resistance after the repair will depend on how well you reapply the screen adhesive, but note that your device will lose its official IP ([link|https://www.iec.ch/ip-ratings#:~:text=Electric%20and%20electronic%20equipment%20deteriorate,are%20widely%20used%20throughout%20industry.|Ingress Protection|new_window=true]) rating.