Почините Свои Вещи Сообщество Магазин

iPhone 14 Pro Max Vervanging van de voorste cameramodule

Английский
Голландский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone 14 Pro Max Vervanging van de pentalobe-schroeven

Het markeren van de openingsplectrum (3 mm)

iPhone 14 Pro Max Scherm (vooraf vereiste handleiding)

iPhone 14 Pro Max Vervanging van de oorstukspeaker

Информационный справочник

= Готово = Не завершен
    Use this guide to remove or replace the front-facing camera assembly in your iPhone 14 Pro Max.
    This guide was created using the ***A2894*** (international) model. If you're fixing a different iPhone 14 Pro Max model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.
    This assembly includes the front-facing camera and Face ID hardware. These parts come as one unit, and the sensors are [link|https://www.ifixit.com/News/66879/iphone-14-parts-pairing-results-apple-is-still-trying-to-monopolise-repair|uniquely paired to your logic board|new_window=true]. ***Note:*** If you replace this part, ***Face ID will no longer work***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Pro+Max|Answers community] for help.

      Шаги руководства

      Шаг 1 — Koppel de camera- en sensorkabel los

      Gebruik een spudger om de aansluiting van de camera- en sensorkabel in een rechte beweging uit het contact omhoog te wrikken en zo los te koppelen.

      Шаг 2 — Verwijder de voorste camera- en sensormodule

      Gebruik een pincet of je vingers om de voorste camera- en sensormodule te verwijderen.

      Ваш вклад лицензируется под свободной лицензией Creative Commons .