Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

iPhone 14 plus 前置摄像头更换

Английский
Китайский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone 14 Pro Max 五角螺丝更换

三角撬片深度标记

iPhone 14 Plus 后壳替换

Информационный справочник

= Готово = Не завершен
    Use this guide to remove or replace the front-facing camera assembly in an iPhone 14 Plus.
    This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.

    This assembly includes the front-facing camera and Face ID hardware. These parts come as one unit, and the sensors are [link|https://www.ifixit.com/News/66879/iphone-14-parts-pairing-results-apple-is-still-trying-to-monopolise-repair|uniquely paired to your logic board|new_window=true]. ***Note:*** If you replace this part, ***Face ID will no longer work***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help.

      Шаги руководства

      Шаг 1 — 松开前置摄像头盖

      使用 Y000 螺丝刀卸下固定前置摄像头组件排线盖的两颗 1.2 毫米长的螺钉。

      Шаг 2 — 卸下前置摄像头排线盖

      使用镊子或手指卸下前置摄像头排线盖。

      Шаг 3 — 断开相机和传感器排线

      使用撬棒将插头从插座中垂直向上撬开,从而断开相机和传感器排线的连接。

      Шаг 4 — 卸下前置摄像头组件

      使用镊子或的手指卸下前置摄像头组件。

      Ваш вклад лицензируется под свободной лицензией Creative Commons .