Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

스크린 분리하기

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Английский
Корейский
Шаг 17
Screen Removal, Disconnect the battery: шаг 0, изображение 1 из 3 Screen Removal, Disconnect the battery: шаг 0, изображение 2 из 3 Screen Removal, Disconnect the battery: шаг 0, изображение 3 из 3
Disconnect the battery
  • Use the pointed end of a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Spudger/스퍼저의 뾰죡한 끝 또는 깨끗한 손톱을 사용하여 배터리 커넥터를 로직 보드의 커넥터 소켓에서 들어올리세요.

이 보드 및 다른 보드 연결 부분을 둘러싼 검정색 실리콘 씰을 손상하지 마세요. 이 씰은 물과 먼지의 침입을 추가 방지합니다.

수리 중에 실수로 소켓에 닿아 휴대폰에 전원이 공급되지 않도록 커넥터를 로직 보드에서 약간 멀리 구부려 주세요.

Ваш вклад лицензируется под свободной лицензией Creative Commons .