Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

Английский
Итальянский
Шаг 5
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Flip the top of the power supply towards you, like opening a mailbox, to reveal the AC inlet cable connector. Disconnect the AC inlet cable connector.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Flip the top of the power supply towards you, like opening a mailbox, to reveal the AC inlet cable connector.

  • Disconnect the AC inlet cable connector.

Fai molta attenzione a non toccare i condensatori o qualsiasi saldatura esposta sul retro dell'alimentatore. Maneggia la scheda solo dagli angoli.

Capovolgi verso di te la parte superiore dell'alimentatore per rivelare il connettore del cavo di ingresso AC.

Scollega il connettore del cavo di ingresso CA.

Ваш вклад лицензируется под свободной лицензией Creative Commons.