Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

iPhone 15 Pro Max Rückseitenglas tauschen

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Английский
Немецкий
Шаг 2
iPhone 15 Pro Max Back Glass Replacement, Secure an Anti-Clamp: шаг 0, изображение 1 из 3 iPhone 15 Pro Max Back Glass Replacement, Secure an Anti-Clamp: шаг 0, изображение 2 из 3 iPhone 15 Pro Max Back Glass Replacement, Secure an Anti-Clamp: шаг 0, изображение 3 из 3
Secure an Anti-Clamp
  • Pull the Anti-Clamp's blue handle backward to unlock the arms.

  • With the back glass facing up, slide the arms over the right edge of your phone, with one suction cup on the back glass and the other on the screen. Center the suction cups near the bottom edge.

  • Support your phone so it rests level while between the Anti-Clamp's arms—a small box works well.

  • Squeeze the cups together to create suction.

  • If you find that the surface of your phone is too slippery for the Anti-Clamp to hold onto, use tape to create a grippier surface.

Drücke den blauen Griff zurück, damit die Arme der Anti Clamp frei beweglich werden.

Halte die Glasrückseite nach oben und schiebe die Arme über die rechte Kante des iPhones. Ein Saugnapf muss auf der Glasrückseite, der andere auf dem Display in der Mitte am unteren Rand sein.

Stütze dein iPhone auf z.B. einer kleinen Schachtel so ab, dass es horizontal zwischen den Armen der Anti-Clamp liegt.

Drücke die Saugheber zusammen, so dass sie auf den Oberflächen haften.

Wenn die Saugheber nicht gut auf den Oberflächen des iPhones haften, dann kannst du Klebeband verwenden, um eine griffigere Oberfläche zu schaffen.

Ваш вклад лицензируется под свободной лицензией Creative Commons .