Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Wie du den Klebstoff deines iPhone Rückglases ersetzt.

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 12 руководства, которые включают этот шаг.

Английский
Немецкий
Шаг 6
iPhone 16 Pro Max Back Glass Installation: шаг 0, изображение 1 из 3 iPhone 16 Pro Max Back Glass Installation: шаг 0, изображение 2 из 3 iPhone 16 Pro Max Back Glass Installation: шаг 0, изображение 3 из 3
  • Carefully align the exposed edge of the adhesive strip with the corresponding edge of the iPhone's frame.

  • Once the adhesive is pressed into place, you can't reposition it—you'll have to remove it and start over with new adhesive.

  • When it's correctly aligned, gently press the exposed adhesive strip onto the frame.

Halte die blaue Lasche weg vom Arbeitsfeld und bringe den Klebstoff auf die untere Kante deines iPhones auf.

Lege die untere Kante des Klebstoffes in die dafür vorgesehene Nische am Rahmen und achte darauf, dass die Federkontakte alle mit den Aussparungen in der Folie übereinstimmen.

-[title] Apply the adhesive
-[* black] Hold the blue liner out of the way and align the adhesive with the bottom edge of the iPhone.
-[* yellow] Lay the bottom edge of the adhesive into its recess in the frame, making sure the iPhone's spring contacts are aligned with their cutouts in the liner.
+[* black] Carefully align the exposed edge of the adhesive strip with the corresponding edge of the iPhone's frame.
+ [* icon_caution] Once the adhesive is pressed into place, you can't reposition it—you'll have to remove it and start over with new adhesive.
+[* black] When it's correctly aligned, gently press the exposed adhesive strip onto the frame.

Ваш вклад лицензируется под свободной лицензией Creative Commons .