Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Changement vitre arrière iPhone 16

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 17 руководства, которые включают этот шаг.

Английский
Французский
Шаг 2
iPhone 16 Back Glass Removal, Secure an Anti-Clamp: шаг 0, изображение 1 из 3 iPhone 16 Back Glass Removal, Secure an Anti-Clamp: шаг 0, изображение 2 из 3 iPhone 16 Back Glass Removal, Secure an Anti-Clamp: шаг 0, изображение 3 из 3
Secure an Anti-Clamp
  • Pull the Anti-Clamp's blue handle backward to unlock the arms.

  • With the back glass facing up, slide the arms over the right edge of your phone, with one suction cup on the back glass and the other on the screen. Center the suction cups near the bottom edge.

  • Support your phone so it rests level while between the Anti-Clamp's arms—a small box works well.

  • Squeeze the cups together to create suction.

  • If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, use tape to create a grippier surface.

Tirez la poignée bleue vers l'arrière pour déverrouiller les bras de l'Anti-Clamp.

Avec la vitre arrière face vers le haut, enfilez votre téléphone dans l'Anti-Clamp, en plaçant une ventouse sur le dos en verre et l'autre sur l'écran. Centrez les ventouses près du bord inférieur.

Soutenez votre téléphone afin qu'il repose à niveau entre les bras de l'Anti-Clamp ; une petite boîte fonctionne bien.

Appuyez sur les ventouses pour appliquer la pression sur la zone souhaitée.

Si la surface de votre appareil est trop glissante pour que l'Anti-Clamp s'y accroche, vous pouvez utiliser du ruban adhésif pour créer une surface plus adhérente.

Ваш вклад лицензируется под свободной лицензией Creative Commons .