/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Регистрация
Войти
Помощь

Модерация

Как это работает

Просмотр:

Удачные голосования
Проходящие сейчас голосования Удачные голосования Неудачные голосования

Голосов в этом месяце:

291

204

188

116

97
Сочетания клавиш

Любой пользователь с репутацией больше 20 может отмечать комментарии и посты как проблемные.

Принять как решение

Пост: Ответ на "Mower is stuck in neutral gear"
Последний голос:
Проголосовавшие: oldturkey03 (Решение Администратора)
–

Скрыть подробности

Beverly Sims @beverlysims

Репутация: 85

Вопрос

Mower is stuck in neutral gear

Опубликовано:

Took the mower up an incline and came back down. You cannot shift to forward or reverse. Mower on or off. It will not move. You usually can push the mower anywhere if you manually move this metal part that goes into the transmission. Can someone tell me if this can be fixed without professional assistance. What is the proper name and part number or can you direct me to a parts repair list on-line?

mayer @mayer

Репутация: 688к

Ответ

Опубликовано:

You may try to purge the transaxle.

To purge the transaxle follow these steps:

1. Place tractor on an open level surface, clear of objects.

2. Turn engine off and apply parking brake.

3. Disengage transaxle by placing freewheel control in disengaged position.

4. Sitting in the tractor seat, start engine.

CAUTION: At any time during step 5 there may be movement of the drive wheels.

5. While the engine is running, move the throttle control to the slow position.

6. With motion control lever in neutral position, slowly disengage clutch/brake pedal (lifting foot off of the pedal).

7. Move motion control lever to full FORWARD position and hold for five (5) seconds.

8. Move motion control lever to full REVERSE position and hold for five (5) seconds.

9. Repeat steps 5 through 7, three (3) times.

10. Move motion control lever to neutral position.

11. Shut off engine and set parking brake.

13. Engage transaxle by placing freewheel control in engaged position.

14. Sitting in the tractor seat, start engine.

15. While engine is running, move throttle control to half (1/2) speed.

16. With motion control lever in neutral position, slowly disengage clutch/brake pedal.

17. Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position.

18. After the tractor moves approximately five (5) feet return the motion control lever to the neutral position.

19. Repeat steps 14-16, with the motion control lever three (3) times.

20. The transaxle is now purged and ready for normal operation.