Возврат к шагу #7
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the |
|---|---|
| - | [* orange] Insert an opening pick into the gap under the screen |
| - | [* icon_note] The watertight adhesive holding the |
| + | [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame. |
| + | [* orange] Insert an opening pick into the gap under the screen's plastic bezel, ***not the screen itself.*** |
| + | [* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool. |