Возврат к шагу #2
Отредактированно Marty Rippens -
Правка одобрена автор Marty Rippens
- До
- После
- Без изменений
Шаг Линий
| - | [* red] Unscrew four 0.7mm phillips-head screws connecting the back panel to the monitor. |
|---|---|
| - | [* orange] Unscrew the single 0.85mm phillips-head screw from the location shown. |
| - | [* black] A single 0.7mm screwdriver is all that's required for both size screws. |
| - | [* black] Insert the pry tool into the crevice along the side, top, and bottom of the monitor. |
| - | [* black] Pry open the monitor by running the pry tool along the crevice. |
| - | [* black] Lift back panel off of the monitor as shown. |
| + | [* red] Remove the four 0.7 mm Phillips #0 screws connecting the back panel to the monitor. |
| + | [* orange] Remove the single 0.85 mm Phillips #0 screw from the location shown. |
| + | [* black] Insert the plastic opening tool into the crevice along the side, top, and bottom of the monitor. |
| + | [* black] Pry open the monitor by running the plastic opening tool along the crevice. |
| + | [* black] Lift the back panel off of the monitor as shown. |