Возврат к шагу #18
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| [title] Loosen the broken adhesive strips | |
| [* icon_note] This step shows some methods of loosening broken adhesive strips. ''If you were able to remove all eight stretch-release adhesive strips, skip this step. '' | |
| - | [* black] Tilt the iPad and apply a few drops of high concentration (>90%) isopropyl alcohol to the broken strip. Wait for a minute to let the alcohol |
| + | [* black] Tilt the iPad and apply a few drops of high concentration (>90%) isopropyl alcohol to the broken strip. Wait for a minute to let the alcohol penetrate the adhesive. |
| [* black] Slowly slide an opening card under the battery to loosen the adhesive. | |
| [* icon_caution] Be careful not to puncture or bend the battery. If it feels difficult, apply more isopropyl alcohol and try again. | |
| - | [* black] Alternatively, you can use |
| + | [* black] Alternatively, you can use dental floss to slice through the adhesive. Wrap the floss around a bit driver handle or your fingers and thread it back and forth under the battery. |