История Screen Removal Шага #6

	[title] Insert an opening pick
	[* black] Apply a suction handle to the bottom edge of the phone, while avoiding the very edge of the glass.
-	[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the ~~front panel~~ and ~~rear case~~.
-	[* black] Insert an opening pick into the gap.
-	[* icon_note] The watertight adhesive holding the ~~display~~ in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
+	[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.
+	[* black] Insert an opening pick into the gap [https://guide-images.cdn.ifixit.com/igi/JRLPxnWrFi2XoeGy.full\|under the screen's plastic bezel\|new_window=true].
+	[* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.