История Screen Removal Шага #4

Возврат к шагу #4

Отредактированно Arthur Shi - 9 мая 2023 г.

Правка одобрена автор Arthur Shi

	[* icon_note] Support your iPhone on a sturdy object before continuing.
	[* black] Use a hair dryer to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.
	[* icon_note] For complete instructions on how to use a hair dryer, [guide\|157348\|check out this guide\|new_window=true].
	[* black] Wait one minute to give the adhesive a chance to release and present an opening gap.
	[* black] Insert an opening pick under the screen's plastic bezel when the Anti-Clamp creates a large enough gap.
	[* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.
	[* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.
-	[* black] *Skip the next ~~three~~ steps.*
+	[* black] *Skip the next two steps.*