Возврат к шагу #3
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| + | [* icon_reminder] You can't directly connect the display connector to the bottom of the logic board without removing the screen, but you may successfully connect it by screwing the logic board in place. |
|---|---|
| + | [* red] Make sure the logic board rests in place against its screw posts. The posts will properly align the board to the display connector underneath it. |
| + | [* black] Continue with reassembly until you've reconnected the battery. Try to power on the iPhone to see if the screen's connected. If the screen fails to turn on, follow the [guide|178634|screen guide|new_window=true] to manually reconnect the display connector. |
Изображение 1
Нет предыдущего изображения
Добавлено