Возврат к шагу #5
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| [* black] If you removed all three stretch release adhesive strips, congratulations! Lift and remove the battery. | |
| [* icon_note] If one or more adhesive strips broke, ***skip to the next step*** to remove them with isopropyl alcohol. | |
| - | [* icon_reminder] To install a new battery: |
| - | [* black] Clean your frame with isopropyl alcohol and a lint-free or microfiber cloth. |
| - | [* black] ***Before applying adhesive***, temporarily reconnect your new battery and place it in its recess to check if it fits and that the cable reaches the socket on the logic board. Disconnect the battery before continuing. |
| - | [* icon_note] If your new battery doesn't have adhesive installed, [guide|137171|follow this guide|new_window=true] to apply new [product|IF145-458|stretch release adhesive strips|new_window=true], or use [product|IF317-072-2|thin, double-sided tape|new_window=true] to secure it. |