Возврат к шагу #7
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| [* black] Insert the flat edge of an opening pick between the left edge of the battery and the frame. | |
| [* black] Pry the battery upwards slowly with steady force. Give the adhesive time to release. | |
| [* icon_caution] Don't bend or crease the battery. If it feels stubborn, apply a few more drops of isopropyl alcohol and try again. | |
| [* black] Once the adhesive loosens, grab and remove the battery. | |
| - | [* icon_reminder] To install a new battery: |
| - | [* black] Clean your frame with isopropyl alcohol and a lint-free or microfiber cloth. |
| - | [* black] ***Before applying adhesive***, temporarily reconnect your new battery and place it in its recess to check if it fits and that the cable reaches the socket on the logic board. Disconnect the battery before continuing. |
| - | [* icon_note] If your new battery doesn't have adhesive installed, [guide|137171|follow this guide|new_window=true] to apply new [product|IF145-458|stretch release adhesive strips|new_window=true], or use [product|IF317-072-2|thin, double-sided tape|new_window=true] to secure it. |