Перейти к основному содержанию

Возврат к шагу #29

Редактировать с помощью Geoff Wacker -

Правка одобрена автор Geoff Wacker

До
После
Без изменений

Шаг Линий

[* icon_note] The logic board is held in place by two strips of adhesive.
[* red] One under the upper component tab, and one under the Lightning connector ribbon cable.
-[* black] In the following steps only pry where directed, to avoid damaging your logic board.
+[* black] In the following steps only pry where directed so as to avoid damaging your logic board.