Возврат к шагу #8
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| [* black] Slide the pick along the edge of the display, towards the headphone jack. | |
| [* black] If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat. | |
| [* icon_caution] Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display. | |
| - | [* icon_note] A good rule of thumb is to never insert the opening pick more than a quarter inch into the iPad. |
| + | [* icon_note] A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad. |