Возврат к шагу #2
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| - | [* black] |
|---|---|
| + | [* black] Apply a suction cup halfway up the heated side. |
| [* black] Be sure the cup is completely flat on the screen to get a tight seal. | |
| - | [* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case. |
| - | [* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass. |
| + | [* black] While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap. |
| + | [* icon_note] Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again. |
| + | [* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass. |