Помощь
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Flip the iPhone back over and thread a piece of dental floss or strong string behind the battery. Then, slowly pull back and forth in a sawing motion to separate the adhesive.

A stronger alternative to floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

Alternatively, insert a plastic card between the case side of the battery and the rear case.

Do not insert your card in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath.

Do not pry against the logic board or you may damage the phone.

Keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals or catch fire. Do not use any sharp tools to pry at the battery.

Press the card in farther to break up the adhesive behind the battery.

Ваш вклад лицензируется под свободной лицензией Creative Commons.