Перейти к основному содержанию
Помощь
Редактирование шага 22 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Take the broad, flat side of the metal spudger and push the clip down, taking care not to tear the thin metal rail from the rear panel. Alternatively a pair of flat pin nosed pliers can be used to reduce risk of slipping and damaging the headphone jack.

Be careful not to damage any of the headphone jack parts while shaping these clips!

Ваш вклад лицензируется под свободной лицензией Creative Commons.