Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

iPad 2 Wi-Fi EMC 2415 LCD Replacement

iPad 2 Wi-Fi EMC 2415 LCD Replacement

Andrew Bookholt

Andrew Bookholt и 5 другие участники

Последнее обновление February 14, 2024

Нет оценки
Средне
Абсолютно необходимое руководство
Это руководство предназначено только для использования в качестве обязательного условия для других руководств. Оно не полностью само по себе.

Moving LCD out of the way to remove random internal components. Internal Prerequisite.

Выберете то, что вам нужно

Инструменты

  • Phillips #00 Screwdriver
    Phillips #00 Screwdriver
  1. iPad 2 Wi-Fi EMC 2415 LCD Replacement, LCD: шаг 1, изображение 1 из 1
    • Remove the four 2.0 mm Phillips screws securing the LCD to the rear case.

  2. iPad 2 Wi-Fi EMC 2415 LCD Replacement: шаг 2, изображение 1 из 2 iPad 2 Wi-Fi EMC 2415 LCD Replacement: шаг 2, изображение 2 из 2
    • The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.

    • Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.

    • Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.

    • Set the LCD face down on the front panel.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

0 Комментариев

Добавить комментарий

Статистика просмотров:

За последние 24 час(ов): 0

За последние 7 дней: 10

За последние 30 дней: 15

За всё время: 618