Remove the battery from the iPhone.
If your replacement battery came in a plastic sleeve, slide off and remove the sleeve before installation.
If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.
Adhere the battery, disconnect it, and continue reassembling your device.
If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.
Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

Bold
Italic
Underline
Ссылка
将电池从iPhone上拆下来。
Bold
Italic
Underline
Ссылка
如果你的替换电池是装在塑料套里的，请在安装前滑开并取出套子。
Bold
Italic
Underline
Ссылка
如果有任何酒精溶液残留在手机里，在安装新电池之前，请仔细擦掉或让它风干。
Bold
Italic
Underline
Ссылка
在粘贴更换的电池之前，暂时将电池连接器重新连接到逻辑板插座上。这可以确保电池在其凹槽中正确对齐。
Bold
Italic
Underline
Ссылка
粘上电池，断开连接，继续重新组装你的设备。
Bold
Italic
Underline
Ссылка
如果你的新电池没有预装胶条，请参考本指南更换胶条。
Bold
Italic
Underline
Ссылка
在重新组装后进行强制重启。这可以防止一些问题并简化故障排除。

Ваш вклад лицензируется под свободной лицензией Creative Commons .

iPhone 8 Plus 电池更换指南

Перевод шага 6

Редактор последовательности шагов руководства, сочетание клавиш: