Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Английский
Японский
Step 2
Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable. Very carefully pull the digitizer ribbon cable straight out of its sockets on the logic board.
  • Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable.

  • Very carefully pull the digitizer ribbon cable straight out of its sockets on the logic board.

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.