iPhone 8 LCD and Digitizer Replacement

Английский

Голландский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone 8 Vervanging van de pentalobe schroeven

Het markeren van de openingsplectrum (3 mm)

Het tapen van het scherm

iPhone 8 Openingsprocedure

iPhone 8 Loskoppelen van de batterij

iPhone 8 Vervanging van de schermmodule

iPhone 8 Vervanging van de thuisknop/Touch ID-sensor

iPhone 8 Vervanging van de oorstukspeaker

iPhone 8 Vervanging van de voorste camera en sensorkabel

Информационный справочник

= Готово = Не завершен

Какую деталь вы заменяете?

Название

Введение

For more advanced fixers, this guide will help you replace ''only'' the iPhone 8 LCD and digitizer assembly (a.k.a. the bare “front panel”). This requires you to transfer several components from your original screen to the new one before installing it—including the front-facing camera, earpiece speaker, LCD shield plate, and home button assembly.

For all screen/display repairs, '''it's important to carefully transfer the original home/Touch ID sensor onto the new display in order for it to function.''' The solid-state home button is paired to its original logic board by Apple, so replacing it will render it unusable.

'''Note''': If your iPhone’s auto brightness feature does not work properly after your screen repair, make sure your iPhone is updated to [https://support.apple.com/ios/update|iOS 12]. True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.

Заключение