Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Procédure d'ouverture de l'iPad Pro 10,5"

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 21 руководства, которые включают этот шаг.

Английский
Французский
Шаг 13
iPad Pro 10.5" Opening Procedure: шаг 0, изображение 1 из 3 iPad Pro 10.5" Opening Procedure: шаг 0, изображение 2 из 3 iPad Pro 10.5" Opening Procedure: шаг 0, изображение 3 из 3
  • Slowly lift the display from its top edge, being careful not to strain the attached ribbon cables.

  • Remove the two 1.3 mm Phillips screws securing the display connector cover bracket.

  • You may need to angle the driver slightly in order to avoid straining the ribbon cables.

  • Remove the display connector cover bracket.

Soulevez lentement l'écran par son bord supérieur, en faisant attention à ne pas endommager les nappes.

Enlevez les deux vis cruciformes de 1,3 mm qui maintiennent le cache du connecteur de l'écran.

Vous devrez peut-être légèrement incliner le tournevis afin d'éviter d'abîmer les nappes.

Enlevez le cache du connecteur de l'écran.

Ваш вклад лицензируется под свободной лицензией Creative Commons .