Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 10 руководства, которые включают этот шаг.
Перевод шага 13
Шаг 13
-
Remove the screen.
-
Carefully compare your replacement screen with your original part. You may need to transfer additional components (such as the speaker mesh) to the new part.
-
Follow this guide if you are using custom-cut adhesives.
-
If you are using double-sided tape such as Tesa tape, follow this guide.
| [* black] Remove the screen. | |
| [* black] Carefully compare your replacement screen with your original part. You may need to transfer additional components (such as the speaker mesh) to the new part. | |
| [* icon_reminder] To reinstall the screen: | |
| [* black] [guide|126585|Follow this guide|new_window=true] if you are using custom-cut adhesives. | |
| [* black] If you are using double-sided tape such as Tesa tape, [guide|113604|follow this guide|new_window=true]. | |
| + | [* icon_reminder] During the boot-up process after reassembly, the screen will go through a calibration sequence. Do not touch the screen during this process, as it could result in improper touch calibration and create touch issues. |
Ваш вклад лицензируется под свободной лицензией Creative Commons .