Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Remplacement de l'écran de l'iPad Pro 12,9"

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 4 руководства, которые включают этот шаг.

Английский
Французский
Шаг 2
iPad Pro 12.9" Display Assembly Replacement, Adhesive tip: шаг 0, изображение 1 из 2 iPad Pro 12.9" Display Assembly Replacement, Adhesive tip: шаг 0, изображение 2 из 2
Adhesive tip
  • Removing the screen involves using an opening pick or halberd spudger to separate the adhesive securing the screen to the frame.

  • As you slice through the adhesive, note the following:

  • The top has a large patch of thick adhesive. You'll need to slice 1/2" deep in order to cut the adhesive.

  • Don't slice deeper than 2 mm along the long edges of the iPad, or you risk damaging the display panel.

  • The lower edge also has thick patches of adhesive, but there are delicate flex cables in each corner. Don't slice deeper than 1/4" around the lower corners.

  • To help mark the iPad's orientation, you can apply a piece of tape to the top edge of the iPad screen.

Retirer l'écran requiert l'utilisation d'un médiator ou d'une spatule hallebarde (halberd spudger) pour détacher l'adhésif qui fixe l'écran au châssis de l'appareil.

En procédant à l'incision dans l'adhésif, prenez les choses suivantes en compte :

Le haut de l'appareil possède une large bande d'adhésif. Vous devrez découper à une profondeur d'environ 1,2 cm pour le détacher.

Sur les côtés de l'iPad, ne dépassez pas 2 mm de profondeur avec votre outil ou vous risquez d'endommager le panneau d'affichage.

Le bas de l'appareil possède aussi des bandes adhésives larges, mais aussi de des nappes fragiles dans chaque coin. Ne pratiquez pas d'incisions plus profondes que 6 mm autour des coins inférieurs.

Ваш вклад лицензируется под свободной лицензией Creative Commons .