Перейти к основному содержанию

iMac Intel Reemplazo de pantalla de 27 "EMC 2546

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 44 руководства, которые включают этот шаг.

Английский
Испанский
Шаг 2
iMac Intel 27" EMC 2546 Display Replacement: шаг 0, изображение 1 из 3 iMac Intel 27" EMC 2546 Display Replacement: шаг 0, изображение 2 из 3 iMac Intel 27" EMC 2546 Display Replacement: шаг 0, изображение 3 из 3
  • Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear case.

  • The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage.

Comenzando a la izquierda de la pantalla, cerca del botón de encendido, inserta la herramienta de apertura iMac en el espacio entre el panel de vidrio y la carcasa trasera.

El centro de la herramienta de apertura iMac evitará que empujes demasiado la rueda. Si utilizas una herramienta diferente, inserta no más de 9.5 mm en la pantalla. Se corre el riesgo de cortar los cables de la antena y causar daños graves.

Ваш вклад лицензируется под свободной лицензией Creative Commons .