/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Регистрация
Войти

iPad Mini CDMA Front Panel Einheit Austausch

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Назад к руководству
Английский
Немецкий
Шаг 2
iPad Mini CDMA Front Panel Assembly Replacement, Front panel preparation: шаг 0, изображение 1 из 2 iPad Mini CDMA Front Panel Assembly Replacement, Front panel preparation: шаг 0, изображение 2 из 2
Front panel preparation

  • This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue.

  • If you're installing a new front panel assembly, it may need the following preparation:

  • Peel the large clear plastic liner off of the inside of the glass.

  • Peel any blue plastic backings covering the adhesive around the perimeter of the front panel assembly.

  • Once removed, the adhesive strips will be exposed. Don't remove these backings until you're ready to install the front panel assembly.

  • Don't remove any copper coverings from the outlined region, such as yellow kapton tape or black electrical tape.

  • Ensure the glass panel is free of fingerprints and grime before installing it on your device.

Вставьте перевод здесь

Wenn du eine neue Front Panel Einheit installierst, musst du es möglicherweise folgendermaßen vorbereiten:

Ziehe die Schutzstreifen über den Klebestreifen um den Rand der Front Panel Einheit ab.

Entferne den kleinen Klebestreifen auf der Rückseite des Digitizerkabels.

Achte darauf dass jegliches Kupfer auf der neuen Ersatzscheibe abgedeckt ist. Wenn sie ohne das eingebaut wird, kann sie gelegentlich verrutschen.

-[* icon_note] If you're installing a new front panel assembly, it may need the following preparation:
- [* red] Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
- [* orange] Remove the small piece of adhesive backing from the digitizer cable.
-[* black] Make sure all copper is covered on the new replacement screen as once fitted without this the screen will move randomly.
+[title] Front panel preparation
+[* icon_reminder] This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue.
+[* icon_note] If you're installing a new front panel assembly, it ***may*** need the following preparation:
+ [* red] Peel the large clear plastic liner off of the inside of the glass.
+ [* orange] Peel any blue plastic backings covering the adhesive around the perimeter of the front panel assembly.
+ [* icon_caution] Once removed, the adhesive strips will be exposed. Don't remove these backings until you're ready to install the front panel assembly.
+ [* yellow] ***Don't remove any copper coverings from the outlined region***, such as yellow kapton tape or black electrical tape.
+[* black] Ensure the glass panel is free of fingerprints and grime before installing it on your device.

Ваш вклад лицензируется под свободной лицензией Creative Commons .