Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Remplacement de l’ensemble des haut-parleurs du Sony Vaio VGN-SZ120P

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 3 руководства, которые включают этот шаг.

Английский
Французский

Перевод шага 1

Шаг 1
Sony Vaio VGN-SZ120P Speaker Assembly Replacement: шаг 0, изображение 1 из 3 Sony Vaio VGN-SZ120P Speaker Assembly Replacement: шаг 0, изображение 2 из 3 Sony Vaio VGN-SZ120P Speaker Assembly Replacement: шаг 0, изображение 3 из 3
  • Remove the four screws from the underside of the computer. These screws are located underneath where the battery sits and secure the top keyboard panel.

  • To remove the panel below the screen, press up on the two tabs holding the panel in and lift up. The panel should pop off.

  • Before proceeding, remove all black tape holding down wires and other cabling.

Retirez les quatre vis du dessous de l’ordinateur. Ces vis sont situées à l’emplacement où la batterie était insérée et maintiennent le panneau supérieur du clavier.

Pour retirer le panneau supérieur sous l’écran, appuyez sur les deux attaches qui maintiennent le panneau et soulevez-le. Le panneau devrait se détacher.

Avant de procéder, retirez tous les morceaux d’adhésifs noirs qui maintiennent les fils et autres câbles.

Ваш вклад лицензируется под свободной лицензией Creative Commons .