Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Reemplazo de la batería de MacBook Pro 13" con Pantalla de Retina Finales de 2013

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 6 руководства, которые включают этот шаг.

Английский
Испанский
Шаг 4
MacBook Pro 13" Retina Display Late 2013 Battery Replacement: шаг 0, изображение 1 из 3 MacBook Pro 13" Retina Display Late 2013 Battery Replacement: шаг 0, изображение 2 из 3 MacBook Pro 13" Retina Display Late 2013 Battery Replacement: шаг 0, изображение 3 из 3
  • Pull off the black rubber stopper from your bottle of adhesive remover.

  • Twist to loosen or remove the bottle cap before you cut the applicator tip.

  • This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.

  • Use scissors to cut off the sealed tip of the applicator.

  • Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.

  • Twist and close the bottle cap securely before you proceed further.

Saca el tapón de goma de tu botella de removedor de adhesivo.

Tuerce para aflojar y remover la tapa antes de cortar la punta del aplicador.

Esto quita el sello de la botella y permite que la presión se iguale antes de cortar la punta del aplicador. Si te saltas este paso, el removedor de adhesivo saldrá de forma inesperada cuando se corte la punta.

Utiliza una tijera para cortar la punta sellada del aplicador.

Cortar cerca de la punta angosta te dará control así puedes aplicar el removedor de adhesivo en pequeñas cantidades.

Tuerce y cierra la tapa de forma segura antes de proceder.

Ваш вклад лицензируется под свободной лицензией Creative Commons .