Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Английский
Немецкий
Шаг 5
Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board. During reinstallation, be sure to fully reseat the display connector tab. During reinstallation, be sure to fully reseat the display connector tab.
  • Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board.

  • During reinstallation, be sure to fully reseat the display connector tab.

Fasse die schwarze Plastiklasche am Verbinder des Displaykabels, klappe den Bügel hoch und ziehe den Verbinder aus seinem Sockel auf dem Logic Board.

Achte beim Zusammenbau darauf, dass die Plastiklasche wieder völlig eingepasst wird.

Ваш вклад лицензируется под свободной лицензией Creative Commons.