Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Английский
Японский
Step 5
Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board. During reinstallation, be sure to fully reseat the display connector tab. During reinstallation, be sure to fully reseat the display connector tab.
  • Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board.

  • During reinstallation, be sure to fully reseat the display connector tab.

黒色のプラスチックタブを掴み、ディスプレイケーブルコネクターを裏返して開き、ロジックボードのソケットからまっすぐ引っ張ります。

再組み立ての間、ディスプレイコネクターのタブを完全に装着したか確認してください。

Ваш вклад лицензируется под свободной лицензией Creative Commons.