Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Reemplazo de la batería de MacBook Pro 15" Unibody mediados 2010

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 19 руководства, которые включают этот шаг.

Английский
Испанский

Перевод шага 1

Шаг 1
MacBook Pro 15" Unibody Mid 2010 Battery Replacement: шаг 0, изображение 1 из 1
  • Remove the two 7.4 mm Tri-point screws securing the battery to the upper case.

  • Note: For certain repairs (e.g. hard drive), removing the battery is not necessary but it prevents any accidental shorting of electronics on the motherboard. If you do not remove the battery, please be careful as parts of the motherboard might be electrified.

  • You do not necessarily have to follow steps 3-6 to remove the battery in order to replace the hard drive. However it is recommended to remove all power sources from electronics before working on them.

Retira los dos tornillos de punto triple de 7.4 mm que sujetan la batería a la caja superior.

Nota: Para ciertas reparaciones (por ejemplo, disco duro), no es necesario quitar la batería, pero evita cualquier cortocircuito accidental de los componentes electrónicos en la placa base. Si no quitas la batería, ten cuidado ya que las partes de la placa pueden estar electrificadas.

No es necesario seguir los pasos 3 a 6 para extraer la batería y reemplazar el disco duro. Sin embargo, se recomienda eliminar todas las fuentes de alimentación de la electrónica antes de trabajar en ellas.

Ваш вклад лицензируется под свободной лицензией Creative Commons .