Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Sostituzione batteria MacBook Pro Unibody da 15", versione metà 2010

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 19 руководства, которые включают этот шаг.

Английский
Итальянский

Перевод шага 4

Шаг 4
MacBook Pro 15" Unibody Mid 2010 Battery Replacement: шаг 0, изображение 1 из 1
  • Tilt the battery away from the logic board enough to access the battery cable connector.

  • Pull the battery cable connector away from its socket on the logic board and remove the battery from the upper case.

  • Pull the battery cable connector away from the center of the logic board.

  • If you're installing a new battery, you should calibrate it after installation:

  • Charge it to 100%, and then keep charging it for at least 2 more hours. Next, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

Inclina la batteria allontanandola dalla scheda logica finché sarà possibile accedere al connettore del cavo della batteria.

Rimuovi il connettore del cavo della batteria dal suo zoccolo sulla scheda logica e rimuovi la batteria dal case superiore.

Estrai il connettore del cavo della batteria dalla parte centrale della scheda logica.

Dopo aver installato una nuova batteria, dovresti calibrarla:

Carica al 100% e poi tieni sotto carica almeno altre due ore. Quindi stacca l'alimentazione e usa il laptop normalmente per farlo scaricare. All'avviso di batteria in esaurimento, salva il lavoro corrente e tieni acceso il MacBook finché non si iberna perché è scarico. Aspetta almeno altre 5 ore, poi carica il laptop ininterrottamente fino al 100%.

Se noti qualsiasi problema o comportamento inusuale dopo l'installazione di una nuova batteria, può essere necessario resettare l'SMC del tuo MacBook.

Ваш вклад лицензируется под свободной лицензией Creative Commons .