Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.
You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

将Apple Watch加热

Bold
Italic
Underline
Ссылка
准备一个 iOpener （或者拿一个电吹风机或热风枪），将加热过的 iOpener 放在表的正面，直到它摸起来稍微有点烫。
Bold
Italic
Underline
Ссылка
将你的 iOpener 留在上面至少一分钟，使得屏幕充分受热并软化粘合剂。
Bold
Italic
Underline
Ссылка
你或许需要多次从复以上步骤，当然，也可以将 iOpener 在手表正面冷却的部分慢慢摩擦旋转，以便有足够温度去取下屏幕。

Ваш вклад лицензируется под свободной лицензией Creative Commons .

更换苹果手表的电池

Перевод шага 2

Редактор последовательности шагов руководства, сочетание клавиш: