Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.
After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth.
If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, replace the frame.
The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

Bold
Italic
Underline
Ссылка
在安装新的显示器之前，从框架上移除所有痕迹的旧粘合剂非常重要，同时要特别注意移除任何小的玻璃碎片。
Bold
Italic
Underline
Ссылка
从框架上除去所有痕量的胶水和玻璃后，用90%（或更高）异丙醇和无绒布或咖啡过滤器清洁粘合区域。只于一个方向上滑动，不要来回移动。
Bold
Italic
Underline
Ссылка
如果框架弯曲，或者任何胶水或玻璃残留物留在后盖上，新的显示器将不能正确安装并可能损坏。如果有必要，更换框架。
Bold
Italic
Underline
Ссылка
确保新屏幕的最好方法是用一片定制的双面胶带。将胶带应用到屏幕背面，然后小心地通过框架给显示电缆供电。对齐屏幕并将其按压到位。

Ваш вклад лицензируется под свободной лицензией Creative Commons .

三星盖乐世S6的屏幕更换

Перевод шага 11

Редактор последовательности шагов руководства, сочетание клавиш: