Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 30 guides that include this step.

Английский
Итальянский

Translating step 1

Шаг 1
Unplug your iMac's AC cord along with any peripheral devices. Lay your iMac face-down on a soft, clean surface as shown.
  • Unplug your iMac's AC cord along with any peripheral devices.

  • Lay your iMac face-down on a soft, clean surface as shown.

  • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • All three screws will remain captive in the access door.

  • Remove the access door.

Poggiare l'iMac rivolto verso il basso su una superficie pulita e morbida come indicato.

Verificare che non siano presenti tracce di sporco o detriti sulla superficie di lavoro, poiché potrebbero graffiare il pannello di vetro nella parte anteriore dell'iMac. Si consiglia di posizionare un asciugamano fra l'iMac e la superficie di lavoro.

Allentare le tre viti con testa a croce che fissano lo sportello di accesso al bordo inferiore dell'iMac.

Le tre viti resteranno all'interno dello sportello di accesso.

Rimuovere lo sportello di accesso.

[* black] Unplug your iMac's AC cord along with any peripheral devices.
[* black] Lay your iMac face-down on a soft, clean surface as shown.
[* icon_caution] Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.
[* red] Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
[* icon_note] All three screws will remain captive in the access door.
[* black] Remove the access door.

Ваш вклад лицензируется под свободной лицензией Creative Commons.